Point glass holders - swivel fittings
in category: Point glass holders - swivel fittings
Chosen
Price
Material
Finish
Mounting System
Glass Thickness [mm]
List of products
Point glass holders and swivel fittings for glass balustrades
The Point glass holders - swivel fittings category contains 32 point fixings in AISI 304 stainless steel for holding glass panels. It covers single Ø30 mm and Ø50 mm fittings, double clamps and PSG spacers. They are used in glass balustrades, partitions and enclosures, and are intended for installers and builders.
What you will find in this category
- Single Ø50 mm point fixings with M10 thread (M10×40 to M10×90) for glass 8-17.52 mm or 8-21.52 mm.
- Single Ø30 mm point fixings with M8 thread, mostly for glass 6-12 mm, in flat-system versions.
- Double glass clamps: Ø50 mm with M10, length 170 mm, and Ø30 mm with M8, length 150 mm, for glass 8-21.52 mm.
- Round Ø48 mm brackets with M10×38 thread and adjustable position, for glass 8-16.76 mm.
- Versions for 42.4 mm tube or post, and a through fixing bracket for Ø16 mm rod with M6 thread.
- PSG spacers Ø50 mm, 5 mm thick, with slotted or round hole, for M10 point fixing brackets.
How to choose
- Glass thickness: ranges run from 4 mm to 21.52 mm. The most common are 8-17.52 mm, 8-21.52 mm and 6-12 mm, so match the range to your panel.
- Diameter and thread: Ø50 mm fittings use M10, Ø30 mm fittings mostly use M8. Check the thread length and the required mounting hole, for example Ø18 mm on several Ø50 mm models.
- Mounting system: 29 of 32 products are flat-system. Choose the 42.4 mm versions for tube or post mounting.
- Finish: satin is the most common. Black, anthracite, gold PVD, copper PVD and polished are also available.
- Single or double: double clamps hold the glass at two points, with 120 mm axis spacing on the Ø50 mm version.
Typical applications
These fittings are used for glass balustrades, partition walls, shopfronts, shower enclosures, staircase enclosures and canopies. Several models are described as suitable for indoor and outdoor use. Rubber gaskets or spacing rubbers are included with a number of them.
Frequently asked questions
What glass thickness do these fittings take?
It depends on the model. Ranges include 8-17.52 mm, 8-21.52 mm, 6-12 mm, 8-16.76 mm and 4-16.76 mm. Check the range on the product page before ordering.
Are the fittings suitable for outdoor use?
All are made of AISI 304 stainless steel. Several powder-coated and gold PVD models are described as corrosion resistant and suitable for indoor and outdoor use.
What hole size is needed in the glass?
It varies by model. Several Ø50 mm M10 fittings need an Ø18 mm hole. One Ø50 mm M8 model needs 16 mm, and one Ø30 mm model needs a minimum of Ø13 mm.
Not sure which fitting suits your glass and substrate? Contact technical support for help with selection.