Infill Holders
in category: Infill Holders
Chosen
Price
Material
Infill (rod / cable)
Finish
Holder type
Mounting System
List of products
Infill Holders for Balustrade Rods, Bars and Cables
Infill holders in this category connect rod, square bar or cable infill to balustrade posts or flat surfaces. The range is made mainly from AISI 304 stainless steel. It covers pass-through and end brackets for round rod Ø 10-19 mm, square bars and Ø 6 mm cable. It is intended for installers and fabricators of stainless steel balustrades.
What you will find in this category
- Pass-through holders for round rod Ø 10-19 mm, for 42.4 mm tube or flat surface mounting. The rod passes completely through the body.
- Left and right end brackets for rod Ø 12 mm and Ø 16 mm, for 42.4 mm tube or surface mounting.
- Pass-through holders for square bar 10×10 mm, 12×12 mm and 20×20 mm, with two mounting holes or an M6 fixing thread.
- Double pass-through bracket for two Ø 12 mm rods, fastened with three grub screws.
- Cable holders for Ø 6 mm cable: pass-through holder, starting clamp and articulated bracket.
How to choose
- Infill type and size: match the holder to the rod, bar or cable. Round rod Ø 12 mm is the most common size, followed by Ø 16 mm.
- Mounting system: choose flat-surface, 42.4 mm tube or universal holders to suit your post or substrate.
- Holder type: use pass-through holders for continuous infill. Use left or right end brackets at the ends of a run.
- Material: 32 products are AISI 304. One holder for Ø 12 mm rod on 42.4 mm tube is AISI 316 (code 000-906).
- Finish: satin (27 products) or high gloss (6 products). Choose one finish for the whole balustrade.
Typical applications
These holders are used in internal and external stainless steel balustrades. Typical places are stairs, balconies and terraces. Rod infill is fixed to 42.4 mm tube posts or to flat surfaces. Cable holders serve cable balustrade systems. Several models are described as threaded, so no welding is needed.
Frequently asked questions
Which holders fit a 42.4 mm tube post?
14 products are made for a 42.4 mm tube. They include pass-through and end brackets for rod Ø 10-16 mm, plus cable holders for Ø 6 mm cable.
What cable holders are available?
There are three for Ø 6 mm cable. The pass-through holder has a grub screw for the cable. The starting clamp has an M6 thread. The articulated bracket mounts to a 42.4 mm tube or a surface without welding.
What does pass-through mean?
The rod passes completely through the bracket. This simplifies installing continuous horizontal infill in balustrades.
Not sure which holder suits your rod, post or surface? Contact our technical support for help with selection.