Unequal Angle Profiles
in category: Unequal Angle Profiles
Chosen
Price
Material
Height [mm]
Wall Thickness [mm]
Length [mm]
List of products
Unequal Aluminium Angle L-Profiles for Frames and Supports
Unequal Angle Profiles are aluminium L-sections with two legs of different widths. This category has 22 products in EN AW-6060 T6/T66, all 2000 mm long. They are used for support structures, trims, frames and repairs, wherever a symmetrical angle would be too bulky. They are intended for installers, fabricators and builders.
What you will find in this category
- Small sections: 15×10×2 mm to 30×20×2 mm, from 0.25 kg per 2000 mm length, for trims and light edge finishing.
- Medium sections: 40×20×2 mm to 60×40×2 mm, plus 40×30×3 mm and 50×25×3 mm, for frames and general supports.
- Tall-leg sections: 80×20×2 mm, 100×20×2 mm and 80×40×2 mm, for more load-bearing height with a narrow base.
- Thicker-wall sections: 50×30×4 mm, 100×50×3 mm and 100×50×5 mm, for structural use.
- Heavy section: 150×100×10 mm, 13.20 kg per 2000 mm length.
- Ribbed angle: 40×20×2.6 mm, 0.78 kg per 2000 mm length.
How to choose
- Leg sizes: choose the long leg for the supporting height and the short leg for the contact width. Sizes run from 15×10 mm to 150×100 mm.
- Wall thickness: 2 mm is the most common (15 products). Thicker walls of 2.6, 3, 4, 5 and 10 mm suit higher rigidity.
- Weight: a 2000 mm length weighs from 0.25 kg to 13.20 kg. Take this into account for transport and installation on site.
- Surface: all products are mill finish and non-anodised. They can be anodised or powder coated, or left uncoated.
- Profile shape: choose the ribbed 40×20×2.6 mm angle if you need that section instead of a plain L-profile.
Typical applications
Unequal angles are used for asymmetric reinforcement and edge finishing. Typical jobs are support structures, frames, enclosures, trims, protective frames and repairs. The different leg lengths let you join components of different cross-sections. Aluminium EN AW-6060 combines low weight with good rigidity and natural corrosion resistance.
Frequently asked questions
Which alloy are these angles made from?
All products are made from EN AW-6060 in T6/T66 temper (AlMgSi0.5).
Are the profiles anodised?
No. They have a mill finish and are non-anodised. This allows further processing such as anodising or powder coating, or they can be left uncoated for indoor use.
What length are the profiles?
All 22 products are supplied in 2000 mm lengths.
Not sure which leg size or wall thickness you need? Contact our technical support and we will help you choose.