PV Mounting Profiles
in category: PV Mounting Profiles
Chosen
Price
Length [mm]
Profile [mm]
Slot Type
Finish
List of products
PV Mounting Profiles for Solar Panel Installation
Our PV Mounting Profiles are aluminium 6060 rails that carry photovoltaic panels on roof structures. The range covers 40x40, 45x40 and 80x40 mm cross-sections in lengths from 10 cm to 665 cm. Each profile has an upper channel for clamps and a lower channel for roof hooks and adapters. They are intended for installers and builders.
What you will find in this category
- 40x40 mm profiles for M10 hex bolts (DIN 933) with flange nuts, in lengths from 10 cm to 665 cm.
- 40x40 mm profiles with a groove for 28/15 M10 hammer head bolts, in lengths from 10 cm to 665 cm.
- 80x40 mm profiles for 3x DIN 933 M10 bolts and M8 sliding T-nuts, in lengths from 195 cm to 665 cm.
- 45x40 mm profiles with an additional cable channel for M10 bolts, in lengths from 195 cm to 665 cm.
- Natural or black anodised finish across the range.
How to choose
- Bolt type: choose the hex bolt version (M10 DIN 933) or the hammer head version (28/15 M10). The slot differs, so the bolt must match.
- Cross-section: 40x40 mm is the most common. Choose 80x40 mm for the 3-bolt fixing, or 45x40 mm if you need a cable channel.
- Length: lengths run from 195 cm to 665 cm, plus 10 cm sections. Some profiles can be extended with connectors.
- Finish: natural aluminium or black anodised. The anodised finish suits outdoor use and visible installations.
- Clamp compatibility: the profiles take middle and end clamps in the upper channel. Check the product page for the exact fixing.
Typical applications
These rails form the load-bearing sub-structure for photovoltaic modules, for example on pitched roofs. Panel clamps sit in the upper channel. The lower channel connects to roof hooks, adapters or triangular brackets. A single profile can therefore serve as a complete sub-rail.
Frequently asked questions
Which bolts fit these profiles?
Hex bolt versions take M10 DIN 933 bolts, usually with flange nuts. Hammer head versions take 28/15 M10 bolts. Some 40x40 profiles also take M8 nuts in the upper channel.
Can the profiles be extended?
Several profiles can be extended with connectors, including selected 40x40 mm and 80x40 mm versions. Check the individual product description.
Is a black finish available?
Yes. Many profiles come in black anodised finish. The rest are natural aluminium.
Not sure which profile suits your roof system? Contact our technical support for help with selection.