Photovoltaic Accessories
in category: Photovoltaic Accessories
Chosen
Price
List of products
Photovoltaic Accessories for Roof and Ground PV Mounting
Photovoltaic Accessories brings together the mounting hardware for solar installations: roof hooks, aluminium profiles, mounting triangles, clamps, cable seals and systems for carports, ground mounting and ballast. It is intended for installers and builders who need to fit PV modules to pitched roofs, flat roofs and trapezoidal sheet roofs.
What you will find in this category
- Hooks and Mountings - stainless steel roof hooks, adapters and a standing seam bracket for pitched and metal roofs.
- Aluminium profiles - 6060 aluminium mounting profiles for carrying PV modules.
- Mounting triangles - 6060 aluminium triangles at 15°, 25° and 30° for flat and low-pitch roofs.
- Photovoltaic Carports - structures for mounting PV modules over parking spaces.
- Balcony Brackets - brackets for fitting PV modules on balconies.
- Ground-mounted systems - systems for installing PV modules on open ground.
- Mounting accessories - clamps, profile connectors, end caps, cable seals and screws for completing the installation.
- Ballast systems - systems for installing PV modules weighted down on the roof.
How to choose
- Roof type: roof hooks suit ceramic and concrete tiles up to 60 mm thick. J hooks suit slate and bituminous roofs. A standing seam bracket suits standing seam metal roofs.
- Material: profiles, triangles and clamps are aluminium 6060. Hooks are stainless steel 1.4016, and double-threaded screws are A2 (1.4301).
- Tilt angle: mounting triangles come at 15°, 25° and 30°, in horizontal and vertical versions.
- Compatibility: check the 40×40 mm profile, M10 hole or bolt size and clamp height. End clamps range from H30 to H40.
Frequently asked questions
Which roof hooks fit tiled roofs?
The adjustable S-series hooks (S450 to S530) are made for ceramic and concrete tiles up to 60 mm thick. They carry 40×40 mm rails on battens up to 50 mm. Each has an M10 hole.
Can I mount on a standing seam roof without drilling?
Yes. The standing seam bracket in stainless steel 1.4016 (44x90x44 mm) installs without penetrating the roof, preserving its integrity and waterproofing.
What are the double-threaded screws used for?
The A2 stainless M10×200 and M10x250 screws have a wood thread for timber rafters and an M10 thread for roof adapters and mounting triangles.
Not sure which hook, triangle or profile suits your roof? Contact our technical support for help with selection.