Support Accessories
in category: Support Accessories
Chosen
Price
Material
Finish
Mounting System
List of products
Support Accessories: Handrail Mounting Plates and Brackets
This category contains stainless steel mounting plates, flat and articulated brackets and corner fixings for balustrade handrails. All eight products are made from AISI 304 with a satin finish. They suit Ø42.4 mm and 48.3 mm tube and flat handrails. They are intended for installers and builders fitting stair and balcony balustrades.
What you will find in this category
- Handrail mounting plates: 64×24×4 mm, for Ø42.4 mm or 48.3 mm tube, three mounting holes, top-mounted to a flat surface.
- Flat handrail mounting bracket: 64×24×4 mm, oval shape, three holes, central hole with countersunk recess.
- Articulated brackets: 64×24×4 mm, two mounting holes and an articulated eye for adjusting the handrail inclination.
- Corner mounting plates: 43×43×4 mm, for Ø42.4 mm handrails or flat handrails, three mounting holes.
- PINOX external corner mounting: for 42.4 mm balustrade posts, plate 120×120×100 mm, 50 mm standoff from the surface.
How to choose
- Handrail type: choose a profiled plate for round tube, or a flat bracket or corner plate for flat handrails.
- Tube diameter: plates are available for Ø42.4 mm and 48.3 mm. Check the diameter before ordering.
- Angle: use an articulated bracket where the handrail follows stairs or an inclined surface. Fixed plates and brackets suit level runs.
- Position: use a corner plate at corners and bends. Use the PINOX corner mounting for external corners with a 50 mm standoff.
- Screw type: brackets with a countersunk or conical central recess take countersunk head screws for a flush finish.
Typical applications
These parts are used in stainless steel balustrade systems. Plates and brackets are screwed from above to a flat surface, such as a post or other load-bearing element. Articulated versions help on stairs and inclined surfaces. According to the product data, the products suit internal and external balustrades, including stair and balcony systems.
Frequently asked questions
Can these fixings be used outdoors?
Yes. The product data describes them as suitable for internal and external balustrades. They are made from AISI 304 stainless steel with a satin finish.
Which handrail diameters are covered?
The tube plates and brackets are for Ø42.4 mm and 48.3 mm. The corner plates are for 42.4 mm handrails or flat handrails.
Can the handrail angle be adjusted?
Yes, with the articulated brackets. Their articulated eye allows the inclination to be adjusted, which suits stairs and inclined surfaces.
Not sure which plate or bracket fits your balustrade? Contact our technical support for help with selection.