Mounting triangles
in category: Mounting triangles
Chosen
Price
Material
Angle
Panel orientation
List of products
Mounting triangles for PV panels on flat and low-pitch roofs
Our mounting triangles are aluminium 6060 supports that tilt photovoltaic panels on flat roofs and roofs with a low pitch. The range has fixed-angle and adjustable versions, for horizontal or vertical panel orientation. It is intended for installers and builders who need a ready set with fasteners.
What you will find in this category
- Fixed 15° triangles, horizontal (890x860x240 mm) and vertical (1400x1352x374 mm).
- Fixed 25° triangles, horizontal (890x810x380 mm) and vertical (1400x1150x560 mm).
- Fixed 30° triangles, horizontal (890x770x450 mm) and vertical (1400x1150x682 mm).
- Adjustable 15°-30° triangles with an M10 mounting hole, in 1500x580x1050 mm and 980x371x850 mm.
How to choose
- Tilt angle: choose a fixed 15°, 25° or 30° version. Choose an adjustable 15°-30° version if the angle must be set on site.
- Panel orientation: horizontal (level) versions are 890 mm long. Vertical versions are 1400 mm long.
- Dimensions: check the triangle size against the panel and the available roof area. Overall sizes run from 890x770x450 mm to 1500x580x1050 mm.
- Material and profile: all triangles are aluminium 6060, made from 40×40×3 mm angle profile.
- Fasteners: fixed versions come with an M8 set. Adjustable versions have an M10 hole and a set of fasteners.
Typical applications
These triangles are used for photovoltaic installations on flat roofs and low-pitch roofs. The angle lifts the panels to the chosen tilt. The range covers several sizes, so the tilt of the PV panels can be matched to the project.
Frequently asked questions
Which tilt angles are available?
Fixed triangles come in 15°, 25° and 30°. Two adjustable versions cover 15°-30°.
What are the triangles made of?
All eight products are made of aluminium 6060. They are built from 40×40×3 mm angle profile.
Are fasteners included?
Yes, each product is supplied as a set with fasteners. Fixed versions have M8 fasteners, for example M8 DIN 7380 screws. Adjustable versions have an M10 mounting hole.
Not sure which angle or size suits your roof? Contact our technical support and we will help you choose.