Clip rails and pipe clips
in category: Clip rails and pipe clips
Chosen
Price
Type
Pipe diameter
Adhesive tape
List of products
Underfloor heating clip rails and pipe clips - how to choose
Clip rails and pipe clips are used to lay and secure pipes in underfloor heating systems. This category includes single-arm and double-arm clips for Ø16-32 mm pipes, Rail mounting rails for 10-25 mm pipes and wall-to-floor bend supports. The range is designed for installers and contractors who want fast, consistent installation.
What you’ll find in this category
- Double-arm clips: long (50 pcs, 102 mm) and short (60 pcs, 78 mm), for Ø16-32 mm pipes and cables, holding two pipes or cables at once.
- Single-arm clips: long (60 pcs, 102 mm) and short (80 pcs, 78 mm), for Ø16-32 mm pipes.
- Rail mounting rails for 10-12, 16-18 and 20-22 mm pipes, available with or without adhesive tape.
- Rail mounting rails for 25 mm pipes, 1 m long, available with or without adhesive tape.
- Wall-to-floor bend supports: 10-12 mm (25 pcs), 14-18 mm (25 pcs) and 20-22 mm (100 pcs).
How to choose
- Pipe diameter: match the rail or bend support to the pipe diameter (10-12, 14-18, 20-22 or 25 mm). The clips fit Ø16-32 mm pipes.
- Rail fixing method: the version with adhesive tape requires no drilling or plugs. The version without tape is fixed to the surface with plugs or screws through the holes in the rail.
- Clip length: the long version is 102 mm with a 77 mm plug; the short version is 78 mm with a 55 mm plug. Choose according to the layer into which the plug will be inserted.
- Number of arms: a double-arm clip holds two pipes or cables at once; a single-arm clip holds one.
- Pack size: clips come in packs of 50, 60 or 80, and bend supports in packs of 25 or 100. Choose larger packs for bigger projects.
Typical applications
Rail mounting rails guide pipes in underfloor and wall heating systems. The pipe is pressed into the snap-in clips, and their fixed spacing ensures even gaps between loops. The rails are suitable for insulation boards and concrete substrates. Clips made from high-impact polypropylene secure pipes in heating and water systems, as well as electrical cables.
Frequently asked questions
What is the difference between a Rail mounting rail with tape and one without?
The rail with tape has factory-applied self-adhesive tape. Simply remove the backing film and press it onto the surface, without drilling or plugs. The rail without tape is fixed with plugs or screws through the mounting holes.
Which pipes do the single-arm and double-arm clips fit?
The clips fit pipes with a diameter of Ø16-32 mm. They are suitable for heating and water systems and for securing electrical cables. They are made from high-impact polypropylene, which resists breakage during installation.
Not sure which rail or clip to choose for your pipe? Contact our technical support team and we’ll help you find the right solution.