Menu
- Photovoltaic Accessories
- Electrical Components
- Lightning Protection Systems
- Aluminium profiles
- Fastening Technology
- Balustrade Components
- Glass clamp holders
- Point glass holders - swivel fittings
- Floor-Mounted Glass Clamps - Spigot
- Full Glass Balustrades
- Side Post Fixings
- Rubber and Silicone Washers
- Infill Holders
- Handrail Brackets and Supports
- Balustrade Posts
- Rosettes - Cover Plates
- Fixings for Posts and Handrails
- End Caps
- Stainless Steel Tubes, Profiles and Rods
- Elbows, connectors
- Custom glass
- Mounting Accessories
- Cable system
- Glass Roofing Systems
- Fencing Systems
- Installation Technology
- Metalwork and Welding
- Bird and Rodent Deterrents
- New products
Pinox 5243 – Anaerobic Adhesive for Stainless Steel 5g
0
Description
Pinox 5243 – Anaerobic Adhesive for Stainless Steel 5g
Pinox 5243 is a professional shaft-hub type anaerobic adhesive with a capacity of 5g, designed for permanent securing of threaded and press-fit connections of stainless steel components. It cures upon contact with metal in the absence of oxygen, guaranteeing reliable bonding in hard-to-reach places — e.g., when installing balustrades, brackets and structural elements made of stainless steel.
The adhesive performs wherever high thermal resistance (up to 200°C) and connection durability unaffected by vibrations and time are required. The formulation is resistant to cracking and crumbling, and the compact bottle with precision applicator enables point dosing even in tight installation spaces.
Key advantages
- Permanent connection — does not loosen over time, resistant to vibrations
- Resistance to cracking and crumbling — long-term bonding effectiveness
- Thermal resistance up to 200°C — safe use at high temperatures without loss of properties
- Fast curing time — approximately 10 minutes for mild steel, functional strength after 12 hours, full strength after 24 hours
- Precision applicator — easy, point application of adhesive
- Can be used with activator — accelerates the curing process on passive surfaces
Technical parameters
- Type: shaft-hub anaerobic adhesive
- Designation: 5243
- Capacity: 5g
- Maximum bonding gap: 0.2mm
- Maximum thread diameter: M36
- Thermal resistance: up to 200°C
- Functional strength: 12 hours
- Full strength: 24 hours
- Curing time (mild steel): approximately 10 minutes
- Package length: 100mm
- Weight: 0.005kg
- EAN: 5903313205344
Surface preparation: before applying the adhesive, the components to be joined should be thoroughly dried and degreased. A clean, dry surface ensures optimal bonding and maximum connection strength.
Technical data
| Material | A2 - stainless steel |
| Thread type | M10 |