PSG gate catcher for cantilever sliding gate 70/80, galvanised steel
Leave feedback on the product
PSG gate catcher for cantilever sliding gate made of galvanised steel. Sheet thickness 4 mm, dimensions 110.5 x 143 x 100 mm, weight 1.1 kg. For 70×70 mm and 80×80 mm tracks. Slotted mounting holes 24×10.5 mm, round hole ø12.1 mm.
Product code: 001-252
Description
PSG gate catcher for cantilever sliding gate 70/80, galvanised steel
PSG steel gate catcher designed for cantilever sliding gates running on a 70×70 mm or 80×80 mm cantilever gate track. It stabilises the gate leaf when closed and distributes its weight evenly across more structural components, which significantly extends the service life of the carriages and reduces their operational wear.
The gate catcher works together with the end wheel and acts as a guide – once the end wheel enters the catcher, the gate is held steady in the closed position, eliminating lateral movement of the leaf. The rear mounting plate features two slotted holes that allow the position to be adjusted during installation, as well as a round hole ø12.1 mm. The built-in rubber stop cushions the impact of the end wheel and reduces noise when the gate closes.
The product is made of galvanised steel with a sheet thickness of 4 mm, providing high corrosion resistance and long-lasting performance in outdoor conditions.
Dimensions and technical data
- Overall width: 110.5 mm
- Mounting plate width: 96 mm
- Mounting plate height: 143 mm
- Side wall height: 94 mm
- Overall depth: 100 mm
- Top cover depth: 55 mm
- Overall height (side view): 101–104 mm
- Sheet thickness: 4 mm
- Slotted mounting holes: 24 × 10.5 mm – 2 pcs
- Round hole: ø12.1 mm
- Hole spacing: 36 mm
- Compatibility: 70×70 mm and 80×80 mm track
- Material: galvanised steel
- Weight: 1.1 kg
- Manufacturer: PSG
- EAN: 5901289674850
Application
The gate catcher is a key component of a cantilever sliding gate system. Mounted on the gate post on the closing side, it works with the end wheel fitted to the gate leaf. Thanks to the adjustable mounting holes, the installer can set the position of the catcher precisely to suit specific installation conditions. The solid construction made of 4 mm thick galvanised steel guarantees trouble-free operation for many years, even with intensive use of the gate in industrial and commercial facilities.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
