PSG Steel Gate Stop for Swing Gates 120×100 mm – Bolt-Down Stop

The PSG steel gate stop for swing gates is a robust gate stop designed to be fitted where the gate leaves meet. It holds the leaf reliably in the closed position, protecting the gate and posts from mechanical damage caused by excessive pressure or gusts of wind.

Made of steel, the gate stop has a distinctive domed shape that effectively cushions the impact of the gate leaf. Four mounting holes with a diameter of 9 mm allow the gate stop to be bolted down quickly and securely – no welding or specialist equipment required. Installers particularly value this solution, as it keeps installation time to a minimum.

Dimensions and technical data

Application and installation

The gate stop is fixed to the ground (block paving, concrete, paved surface) where the leaves of a double swing gate meet. Thanks to its compact design and low profile (43 mm), it does not obstruct pedestrian or vehicle traffic, while still effectively limiting the movement of the gate leaf. Four fixing points spaced at 95 × 75 mm ensure stability even under heavy wind loads.