PSG 70×70 mm cantilever gate track end cap for cantilever sliding gate
Leave feedback on the product
PSG 70×70 mm galvanised steel cantilever gate track end cap. Dimensions 70×70 mm, mounting depth 57 mm, plate thickness 3 mm. For cantilever sliding gate. Weight 0.24 kg.
Product code: 001-246
Product features
[PIM] szyny-jezdne #115
- Material Steel
Description
70 × 70 mm end plate with a clamping insert extending 57 mm into the track – closes the end of the 70 × 70 × 4 mm track on a cantilever sliding gate
About the product
The track end cap closes the open end of a cantilever gate track. It consists of an end plate and a clamping insert that slides into the track and is secured with screws.
The end plate measures W × H = 70 × 70 mm and has a thickness t of 3 mm. The clamping insert extends into the track to a depth D of 57 mm.
Each unit weighs 0.24 kg. The end cap fits 70 × 70 × 4 mm track.
Selection and installation
- ✓Check the track cross-section – the end cap fits 70 × 70 × 4 mm track.
- ✓Slide the clamping insert into the end of the track until the end plate sits flush against the end face.
- ✓Tighten the clamping screws until the end cap is securely fixed to the track with no play.
Important
The end cap is not a substitute for a gate stop or travel limiter. The system's end stops and gate stops determine the gate leaf's end positions.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
