Fence End Clamp 80×80 mm Anthracite RAL 7016 – Mounting Set
Leave feedback on the product
End fence clamp 80×80 mm, anthracite RAL 7016 colour. 2 mm thick steel sheet, powder coating. For posts with an 80×80 mm cross-section, fitted on the outer posts of the fence. Spacer suited to Ø4 mm wire.
Product code: 001-619
Product features
[PIM] obejmy #164
- Accessory Type End clamp
- Colour Graphite RAL 7016
- Post Profile Dimension [mm] 80x80
Description
Sheet metal band, 2 mm thick, around a 80 × 80 mm post, with one lug, a M8 × 25 bolt and a spacer for Ø 4 mm wire
About the product
The end fence post clamp is used to secure a single fence panel to the post where the fence ends – for example, beside a gate, pedestrian gate or wall. The sheet metal band wraps around the post, and a single lug holds the panel wire.
The internal dimensions a × a are 80 × 80 mm, so the clamp fits a post with this cross-section. The sheet thickness s is 2 mm. The set includes a M8 × 25 bolt with nut and a plastic spacer for Ø 4 mm wire.
The coating (zinc-coated and powder-coated, anthracite RAL 7016) protects the steel against corrosion under typical conditions. In the event of contact with salt, chemicals or constant moisture, choose a version suitable for the exposure conditions.
Selection and installation
- ✓Check the post cross-section – the clamp fits 80 × 80 mm posts.
- ✓Fit the clamp around the post with the lug facing the panel.
- ✓Insert the panel wire into the plastic spacer and tighten the M8 bolt in the lug.
Important
The supplied spacer is sized for Ø 4 mm wire. For panels with a different wire diameter, choose a suitable spacer.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
