Dromet ring expansion anchor bolt PSRe M10x230/150 galvanised

The PSRe 10x230/150 ring anchor by Dromet is a proven mechanical fastener with a ring-shaped design, intended for permanent fixing in non-cracked concrete of at least class B20. Thanks to ETA 05/0242 certification, CE marking and national technical approval AT-15-7574/2008, it meets the highest standards — it can be used in critical structural connections without risk of the design being questioned by the site supervisor.

The anchor is supplied complete — with a nut and washer — eliminating the need to source additional components on site and speeding up installation.

Application

The PSRe anchor is designed for fixing metal profiles and structures, grating platforms, handrails, balustrades, machinery and other structural elements and building fittings. Approved substrates include:

Technical parameters

Certificates and approvals

Installation recommendations

The mounting hole should be drilled perpendicular to the substrate surface, then thoroughly cleaned of dust and debris. The fastener should be inserted into the hole using light hammer taps. The nut should be tightened using a torque wrench — once the anchor has expanded, the washer beneath the nut must be firmly pressed against the fixed element. Installation parameters (tightening torque, spacing, edge distances) are specified in the technical approval AT-15-7574/2008 — the values given therein must not be exceeded.