Dromet ring anchor expansion sleeve PSRe M10x150/70 galvanised

The PSRe M10x150/70 ring anchor by Dromet is a proven solution for the permanent fixing of metal structures, profiles, gratings, railings and machinery in concrete substrates. The ring design ensures even expansion within the mounting hole, resulting in high load capacity and stability of the anchoring. The fastener holds a European Technical Approval ETA 05/0242, a CE certificate and a national approval AT-15-7574/2008 — allowing you to use it with confidence in projects requiring documented compliance with standards.

The anchor is designed for use in non-cracked concrete of at least class B20, natural stone with a dense structure, and solid brick. Combined with its compact M10 size, it is a versatile fixing component for photovoltaic installations, support structures and general construction applications.

Technical parameters

Certificates and approvals

Installation recommendations

The mounting hole should be drilled perpendicular to the substrate surface and thoroughly cleaned of drilling dust. The fastener should be insertable with light hammer taps. A torque wrench is required for installation — after expansion of the fastener, the washer under the nut must be firmly pressed against the fixed element. All data regarding permissible loads, spacing and edge distances is provided in Technical Approval AT-15-7574/2008 — the parameters specified therein must not be exceeded.