Dromet ring anchor expansion PSRe M12x110/18 galvanised
Leave feedback on the product
Dromet PSRe M12x110/18 ring expansion anchor, electro-galvanised. Thread M12, length 110 mm, anchoring depth 85 mm, washer diameter 18 mm, weight 0.102 kg. Structural steel. For concrete, natural stone and solid brick. Holds ETA 05/0242, CE marking and AT-15-7574/2008 approval.
Product code: 001-987
Product features
[PIM] kotwy-pierscieniowe-ocynkowane #180
- Thread type M12
- Length [mm] 110
Description
Dromet ring shield anchor PSRe M12x110/18 galvanised
The PSRe M12x110/18 ring anchor by Dromet is a proven mechanical fastener designed for permanent fixing of structures in concrete and masonry substrates. Thanks to its ring-shaped design with an expanding sleeve, the anchor provides high load-bearing capacity and stable load transfer, making it a reliable component when installing profiles, metal structures, balustrades, grilles, machinery and installation fittings — including mounting structures for photovoltaic panels.
The fastener holds a European Technical Approval ETA 05/0242 with a CE certificate as well as national approval AT-15-7574/2008, confirming compliance with safety requirements and allowing its use in critical structural connections.
Applications and substrates
- Uncracked concrete of at least B20 (C16/20) grade
- Natural stone with a dense structure
- Solid brick
- Fixing of mounting profiles, steel structures, grilles, handrails, machinery and building equipment
Technical parameters
- Designation: PSRe 12x110/18
- Thread: M12
- Drilling diameter (fi): 12 mm
- Overall length (L): 110 mm
- Thickness of fixed element (E): 18 mm
- Anchoring depth (F): 85 mm
- Hole depth (D): 130 mm
- Material: structural steel, electro-galvanised
- Construction: ring type with nut and washer
- Weight: 0.102 kg
- EAN: 5902706889963
- Sales unit: piece
Installation recommendations
The mounting hole should be drilled perpendicular to the substrate surface and then thoroughly cleaned of dust and drilling debris. Insert the anchor into the hole using light hammer taps — the fastener should go in without excessive resistance. A torque wrench is required to tighten the nut, ensuring controlled expansion of the sleeve. Once properly installed, the washer under the nut must be firmly pressed against the fixed element. All detailed data regarding loads, spacing and edge distances are provided in Technical Approval AT-15-7574/2008 — the parameters specified therein must not be exceeded.
Certificates and approvals
- European Technical Approval: ETA 05/0242
- Certificate: CE
- National Technical Approval: AT-15-7574/2008
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
