Dromet ring anchor bolt PSRe M12x180/88 galvanised

The PSRe M12x180/88 ring anchor from Dromet is a proven mechanical fastener of ring construction, designed for permanent anchoring in uncracked concrete of at least class B20, dense natural stone and solid brick. Thanks to its European Technical Approval ETA 05/0242, CE certificate and national approval AT-15-7574/2008, it is a suitable choice for applications requiring documented load capacity and standards compliance.

The anchor is ideal for fixing metal profiles and structures, grating platforms, handrails, machinery and other structural and equipment elements. Supplied complete with nut and washer, it allows installation to begin immediately without the need to source additional components.

Technical specification

Certificates and approvals

Installation recommendations

The mounting hole should be drilled perpendicular to the substrate surface and thoroughly cleaned of drilling dust. The anchor is inserted into the hole using light hammer taps. Tighten the nut only with a torque wrench – this ensures proper expansion of the sleeve and full load capacity of the fastener. After expansion, the washer under the nut should be firmly pressed against the fixed element. Detailed parameters regarding loads, spacing and edge distances can be found in Technical Approval AT-15-7574/2008 – the limit values contained therein should not be exceeded.