Dromet PSRe expansion ring anchor M12x160/68 galvanised

The PSRe 12x160/68 ring anchor from Dromet is a proven fixing solution designed for the permanent installation of profiles, metal structures, gratings, railings, machinery and other equipment on a building. Thanks to its ring-shaped design with nut and washer, it ensures high load capacity and secure anchoring in concrete, stone and brick substrates.

The anchor holds a European Technical Approval ETA 05/0242, a CE certificate and a national approval AT-15-7574/2008 — a guarantee of compliance with regulatory requirements and full documentation for technical acceptance.

Application

The PSRe anchor is designed for use in substrates made of non-cracked concrete of at least class B20, dense natural stone and solid brick. It is ideal for installing photovoltaic structures, balustrades, support brackets and installation components where reliable mechanical anchoring with documented load capacity is required.

Technical parameters

Certificates and approvals

Installation recommendations

The mounting hole should be drilled perpendicular to the substrate surface and thoroughly cleaned of drilling dust. The anchor should be inserted into the hole with light hammer taps. Tighten the nut using a torque wrench — once the fastener has expanded, the washer under the nut must be firmly pressed against the fixed element. Installation parameters (tightening torque, spacing, edge distances) are specified in approval AT-15-7574/2008 — these must not be exceeded.

Sales unit: 1 piece (anchor with nut and washer).