Dromet PSRe M10x90/10 Ring Expansion Anchor, Galvanised
0
Description
Dromet PSRe M10x90 mm galvanised ring shield anchor
The PSRe M10×90 ring anchor from Dromet is a proven mechanical fastener of ring-type design, intended for permanently fixing profiles, metal structures, grilles, railings, machinery and building fittings. Thanks to its European Technical Approval ETA 05/0242, CE certificate and national approval AT-15-7574/2008, it is approved for use in structurally responsible connections — eliminating the risk of formal objections during inspections.
Made from structural steel with anti-corrosion protection in the form of electrolytic zinc, the anchor provides long-lasting protection against corrosion in indoor and moderately damp conditions. Supplied with a nut and washer — no need to order separate accessories.
Application and base materials
The PSRe anchor is designed for installation in the following base materials:
- Non-cracked concrete of at least class B20 (C16/20)
- Natural stone with a dense structure
- Solid brick
Installation recommendations
- Drill the mounting hole perpendicular to the base surface and clean it thoroughly of dust
- Insert the fastener using light hammer taps
- Use a torque wrench for tightening — this guarantees the correct tightening torque
- After the fastener has expanded, the washer under the nut must be firmly pressed against the fixed element
- Installation parameters and permissible loads are specified in approval AT-15-7574/2008 — these must not be exceeded
Technical parameters
- Designation: PSRe 10x90/10
- Thread: M10
- Drilling diameter (fi): 10 mm
- Total length (L): 90 mm
- Thickness of the fixed element (E): 10 mm
- Anchoring depth (F): 70 mm
- Hole depth (D): 110 mm
- Material: structural steel, electrolytic zinc plating
- Design: ring type with nut and washer
- Weight: 0.058 kg
- EAN: 5907518656451
- Sales unit: piece
Technical data
| Thread type | M10 |
| Length [mm] | 90 |