Skip to main content
Open search engine
Search
Close search engine Clear Search
Products in the cart: 0. See details
Your cart is empty
Dromet

Countersunk timber screw, zinc-plated, TX25, 5.0×60 mm – partial thread – pack of 250 pcs

Go to Product feedback

Structural wood screw 5×60 mm, low-carbon steel with electro-galvanised zinc plating. Countersunk head, Torx-25 drive, Type-17 point, milled ribs under the head. Head diameter 9.5–10 mm. Pack of 250 pcs. For carpentry joints.

Go to full description
with VAT without VAT
Price €7.07
incl. 23% VAT
pcs.
Availability:
In stock (large quantity)
Shipping time: 10 Business days

Description

Countersunk timber screw · 5 × 60 mm

Countersunk timber screw with TX25 drive and 35 mm partial thread; low-carbon steel, electro-galvanised

TX25Torx drive
35 mmthread length Lt
250 szt.per pack
electro-galvanisedcoating
Dimensional drawing of a countersunk timber screw 5 × 60 mm: L = 60 mm, Lt = 35 mm, Dk = 9.5–10 mm, TX25 drive
Open the dimension drawing in full size
Illustrative drawing for size 5 × 60 mm. Nominal values according to the supplier's dimensional data sheet.

Quick choice

ApplicationJoining timber elements
InstallationTX25 bit; the countersunk head pulls flush into the timber, select the pilot hole to suit the timber
ConditionsThe zinc coating protects the steel against corrosion under typical conditions; in the event of contact with salt, chemicals or constant moisture, choose a version suitable for the exposure conditions

About the product

The timber screw is used to join timber components. It has a countersunk head, a Torx drive (TX25) and a partial thread. The head pulls flush into the timber. The product is sold in a pack of 250.

The size 5 × 60 mm indicates a nominal diameter of 5 mm and an overall length L of 60 mm (including the head). The thread length Lt is 35 mm, and the head diameter Dk ranges from 9.5 to 10 mm. These are nominal dimensions according to the supplier's dimensional data sheet. Drive the screw using a TX25 bit. Select the pilot hole size to suit the timber species. Pre-drill the timber near the edges of the component to reduce the risk of splitting.

The screw material is low-carbon steel, and the coating is electro-galvanised. The zinc coating protects the steel against corrosion under typical conditions. In the event of contact with salt, chemicals or constant moisture, choose a finish suitable for the exposure conditions. The screw dimensions do not determine the load capacity of a specific connection. This depends on factors including the timber, the embedment depth and the connection configuration – it is determined by the design.

Dimensions per data sheet

Nominal diameterØ 5 mm
Overall length L (including head)60 mm
Thread length Lt35 mm
Head diameter Dk9.5–10 mm
Headcountersunk
DriveTX25
Nominal dimensions according to the supplier's dimensional data sheet; Dk – range from the data sheet. Length tolerance L according to the data sheet: ±1.25 mm up to 25 mm, ±1.75 mm over 25 up to 80 mm, ±2.5 mm over 80 mm.

Material and coating

Materiallow-carbon steel
Coatingelectro-galvanised

Unit of sale

Sales unitpack of 250 pcs
Unit weight1.175 kg
Weight according to the supplier's data (approximate value).

Selection and installation

  • ✓Choose the pilot hole for the type of timber.
  • ✓Pre-drill near the edges of the element – this reduces the risk of splitting.
  • ✓Drive in with a TX25 bit.

Important

The screw dimensions do not define the load capacity of a particular joint. The load capacity depends, among other things, on the timber, the screw-in depth and the joint layout – it is set by the design.

Reviews

Number of ratings: 0
Rate and review