Menu
Adjustable Mounting Bracket KR 2 60x40x60x2.5 mm Galvanised
Description
Adjustable Mounting Bracket 60×40×60×2.5 mm Galvanised
Adjustable mounting bracket 60×40×60×2.5 mm is a robust angle connector designed for professional joints in timber structures. Thanks to its slotted holes, it allows precise position adjustment of connected elements, significantly simplifying the installation of rectangular or square-section beams and eliminating expansion stresses caused by changes in timber moisture content.
Benefits for the installer
The ability to mutually shift connected elements means that the joint carries no loads from thermal deformation or changes in timber moisture content. Slotted holes allow the installation of non-standard elements and compensation for minor dimensional deviations — saving time on site and reducing the need for corrections. The bracket is compatible with bases featuring rectangular or hexagonal plates.
Dimensions and technical specifications
- Vertical arm height: 60 mm
- Horizontal arm length: 60 mm
- Width: 40 mm
- Sheet thickness: 2.5 mm
- Load capacity: 6.70 kN
- Material: hot-dip galvanised Z275 steel sheet
- Colour: silver
Fixing holes
- ø 5 mm — 12 pieces
- ø 9 mm — 2 pieces
- ø 11 mm — 1 piece
- Slotted hole 11×19 mm — 1 piece
Applications
- Timber and timber-frame structures
- Garden pergolas and gazebos
- Timber roofs — rafter, wall plate and beam connections
- Timber posts — fixing to sole plates
- Joinery and furniture connections
The Z275 zinc coating (hot-dip galvanising) provides high corrosion resistance, making the bracket suitable for use both indoors and outdoors — in the elevated moisture conditions typical of roof structures, pergolas and terraces.
Ładowanie tabeli porównawczej...
Ładowanie galerii...
Technical data
| Sheet metal thickness [mm] | 2.5 |
| Connector Type | Mounting Angle Bracket |
| Material | Steel |