Square tube insert 60×60 mm, grey, wall thickness 3.0–5.0 mm
Leave feedback on the product
Square tube insert 60×60 mm, made of polyethylene, grey. For tube wall thicknesses of 3.0–5.0 mm. External section height 5.0 mm, internal section height 19.0 mm. Core dimension 46.6 mm, rib dimension 54.6 mm. Weight 0.0221 kg.
Product code: 003-039
Product features
[PIM] zaslepki-kwadratowe #1026
- Profile [mm] 60×60
- Colour Grey
[PIM] zaslepki-do-rur-i-profili #1025
- Shape Square
- Profile [mm] 60×60
- Colour Grey
Description
Square tube insert 60×60 mm, grey, wall thickness 3.0–5.0 mm
The grey Square tube insert 60×60 mm is a finishing component that closes the open end of a hollow section. It is designed for tubes with a wall thickness of 3.0–5.0 mm, so one variant fits several wall thicknesses.
The insert is made of polyethylene. The flat flange covers the edge of the tube and gives the end a neat appearance, while the ribbed shank pushes into the tube and holds the insert in place. Inserts of this type are used to close the tube opening and give the end a uniform finish.
Applications
- Finishing the ends of square tubes in support structures and frames
- Closing open ends of hollow sections in mounting structures
- Providing a neat finish to tubes where the end remains visible
Selecting the right insert
When selecting an insert, check the nominal tube size of 60×60 mm and the actual wall thickness, which should be within the 3.0–5.0 mm range. Push-in inserts are selected according to the tube's external dimensions and wall thickness, as these determine how firmly the shank fits inside.
Once the shank is pushed into the tube opening, the flange rests against the edge and covers the opening. The insert is sold individually in units of 1 piece.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
