Square tube insert 120×120 mm, black
Leave feedback on the product
Square tube insert 120×120 mm made of polyethylene, black. Tube wall thickness 3.0–6.5 mm. External section height 6.5 mm, internal section height 28 mm, rib dimension 115 mm. Weight 0.105 kg. For steel and aluminium tubes.
Product code: 003-012
Product features
[PIM] zaslepki-kwadratowe #1026
- Profile [mm] 120×120
- Colour Black
[PIM] zaslepki-do-rur-i-profili #1025
- Shape Square
- Profile [mm] 120×120
- Colour Black
Description
Square tube insert 120×120 mm, black
The black Square tube insert 120×120 mm is a practical finishing component for closing the open ends of hollow sections. It gives the structure a neat finish and helps prevent dirt from entering the tube.
The insert is made of polyethylene. The ribbed internal section slides into the tube and is held in place by a push fit, while the external flange rests against the end of the tube and covers the wall edge. This gives the tube end a neat appearance.
Application and selection
- Closing the ends of square tubes in load-bearing structures, supports and frames
- Finishing steel and aluminium tubes in black
- Installation without additional fasteners, by pushing the insert into the end of the tube
The tube's external dimensions and wall thickness determine the choice of insert, so it is advisable to compare them with the specification before ordering. The ribs compensate for minor dimensional differences inside the tube, while polyethylene is a lightweight material commonly used for this type of finishing component.
Construction
The insert consists of an external section that rests against the end of the tube and a ribbed internal section that slides inside it. The black surface complements dark steel and aluminium tubes.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
