Single-sided rectangular door handle bar 45° AISI 304 satin 1200 mm
Leave feedback on the product
Single-sided rectangular door handle bar made from AISI 304 stainless steel, satin finish. Length 1200 mm, cross-section 20×40 mm, height 60 mm, weight 1.88 kg. Mounting angle 45°, through-fixing. For glass, metal, wooden, PVC doors.
Product code: 000-754
Product features
[PIM] pochwyty-antaby #151
- Material AISI 304
- Finish Satin
Description
20 × 40 mm grip, 1200 mm long, on two supports with a mounting angle of 45° – handle fitted to one side of the door leaf
About the product
A single-sided pull handle is fitted to one side of the door leaf. Bolts are passed through the holes in the door leaf from the opposite side and screwed into the handle supports.
The grip has a cross-section of 20 × 40 mm and a length L of 1200 mm. The supports are fitted to the door leaf at an angle of 45°.
The pull handle is made of AISI 304 stainless steel, finish: satin (satin-brushed finish).
Selection and installation
- ✓Mark out the mounting holes on the door leaf to match the centres of the pull handle supports.
- ✓Pass the bolts through the door leaf from the opposite side and screw them into the pull handle supports.
- ✓Tighten the fixings until the pull handle has no play, and check that it is plumb.
Important
Holes in toughened glass must be made before toughening. Order a pull handle for glass doors together with the door leaf, or match the fixing centres to the existing holes.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
