Round tube insert Ø 30 mm, yellow

The yellow Round tube insert Ø 30 mm is a finishing component for closing the open ends of tubular profiles. The ribbed internal section is pressed into the tube, while the smooth head covers the opening and the tube walls.

Inserts of this type are used in tubular structures, frames, stands, railings and equipment where the profile ends need to be protected and neatly finished. The yellow colour makes the profile ends easy to identify and allows the finish to match the colour scheme of the structure.

Benefits in use

Before purchasing, measure the external diameter and wall thickness of the tube and compare them with the dimensions in the specification, as a correct fit depends on these measurements matching. Press the insert into the open end of the tube until the head rests against the end of the profile.

Insert design

The insert consists of a flat head that rests against the end of the tube and a push-in internal section with a core and several ribs. Once inserted, the ribs press against the walls of the profile and hold the insert in the tube.

The separate external and internal sections allow the head to cover the edge of the profile evenly, while the internal section guides the insert along the axis of the tube. This design is suitable for closing tube ends in load-bearing structures and equipment where a consistent, neat finish is required across multiple points.