Round tube insert 1 1/2" (Ø 48.3 mm), grey

The Round tube insert 1 1/2" is a finishing component for closing open tube ends. Inserts of this type give the structure a neat appearance, cover the cut edge of the tube and help prevent dirt from entering it.

The internal section is fitted with ribs. When pressed into the tube, the ribs press against its wall and hold the insert in place, while the external section remains visible at the end of the tube. The insert is designed for tubes within a specified wall thickness range, so both the tube diameter and wall thickness must be considered when selecting it.

Applications

Selection and installation

Before purchasing, measure the tube's external diameter and wall thickness and compare them with the values in the specification. Press the insert into the end of the tube; before installation, clean and degrease the tube edge to ensure the insert seats properly. The product is sold individually, allowing the quantity to be matched precisely to the number of tube ends in the installation.

For professional installers, consistent finishes across multiple tube sections are important. Push-in inserts with ribs allow tubes to be closed without additional fasteners, while the catalogue dimensions in the specification make it easy to quickly check compatibility with the tube being used.