Rectangular tube insert 80×100 mm, black, 3.0–4.0 mm wall thickness
Leave feedback on the product
Rectangular tube insert 80 x 100 mm, black, made of polyethylene. External flange height 6 mm, internal section with ribs 24 mm high. Core dimensions 65.3 x 84.8 mm, rib dimensions 76.0 x 96.1 mm. Weight 0.06061 kg. For closing the ends of hollow sections.
Product code: 003-130
Product features
[PIM] zaslepki-prostokatne #1027
- Profile [mm] 80×100
- Colour Black
[PIM] zaslepki-do-rur-i-profili #1025
- Shape Rectangular
- Profile [mm] 80×100
- Colour Black
Description
Rectangular tube insert 80×100 mm, black, 3.0–4.0 mm wall thickness
The black Rectangular tube insert 80×100 mm provides a neat and durable closure for the open ends of hollow sections. It is suitable for finishing steel structures, frames, supports and frameworks, as well as any application where the exposed end of a section requires protection.
The insert is made of polyethylene, a material commonly used for finishing products of this type. The external flange covers and conceals the edge of the section, while the ribs on the internal section press against its walls, allowing the insert to be push-fitted into the end.
Applications
- Closing the ends of rectangular sections in steel structures, frames and frameworks
- Finishing supports and load-bearing components where the section remains visible
- Protecting the open end of a section from dirt entering
- Neatly concealing the cut edge of a section
Choosing the right insert
When ordering an insert, match it to the nominal dimensions and wall thickness of the section, as both determine whether the ribs fit correctly. An insert that is too loose in the opening will not be held securely, while one that is too tight will be difficult to push in. The exact dimensions are listed in the specification below.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
