Rectangular tube insert 60×120 mm, anthracite, wall thickness 2.0–4.0 mm
Leave feedback on the product
Rectangular tube insert 60×120 mm made of polyethylene, anthracite (RAL 7016). Tube wall thickness 2.0–4.0 mm. External section height 5.8 mm, internal section height 20 mm. Rib dimensions 56.5 x 115.5 mm. Weight 0.0459 kg.
Product code: 002-774
Product features
[PIM] zaslepki-prostokatne #1027
- Profile [mm] 60×120
- Colour Anthracite grey
[PIM] zaslepki-do-rur-i-profili #1025
- Shape Rectangular
- Profile [mm] 60×120
- Colour Anthracite grey
Description
Rectangular tube insert 60×120 mm, anthracite, wall thickness 2.0–4.0 mm
The Rectangular tube insert 60×120 mm in anthracite (RAL 7016) provides a neat finish to the ends of tubes with a wall thickness of 2.0–4.0 mm. It is made of polyethylene.
The insert is pressed into the open end of the tube. The ribbed internal section fits the tube's cross-section and holds the insert in place, while the external flange covers the edge of the tube for a neat finish.
Applications
- Closing the ends of tubes with a 60×120 mm rectangular cross-section
- Protecting open ends of support structures and frames against dirt and debris
- Neatly finishing visible tube ends in dark anthracite
For installation companies, this is a simple finishing component sold individually and available as a small parcel. The wall thickness range allows the same model to be used with tubes of different wall thicknesses within the specified range.
Selection and installation
When selecting an insert, consider the nominal tube size and its wall thickness, which determines how tightly the ribs fit inside the opening. Push the insert into the clean, degreased end of the tube until the flange rests against its edge. Polyethylene is resistant to moisture, and the dark colour complements dark-coloured structures.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
