Rectangular tube insert 25×60 mm, white
Leave feedback on the product
Rectangular tube insert 25 x 60 mm, made of polyethylene, white. Tube wall thickness 1.5–3.0 mm. External section height 5.0 mm, internal section height 16.8 mm. With ribs, for steel and aluminium tubes. Weight 0.009 kg.
Product code: 002-719
Product features
[PIM] zaslepki-prostokatne #1027
- Profile [mm] 25×60
- Colour White
[PIM] zaslepki-do-rur-i-profili #1025
- Shape Rectangular
- Profile [mm] 25×60
- Colour White
Description
Rectangular tube insert 25×60 mm, white
The white Rectangular tube insert closes the open end of a hollow tube. It gives the structural component a neat, finished appearance and protects the inside of the tube from dirt, which is the primary purpose of this type of insert.
The insert is made of polyethylene. The external section forms a flange that sits against the end of the tube, while the internal section has ribs. Inserts of this type are pressed into the tube opening, with the ribs fitting inside and securing the insert in place.
Applications and selection
- Closing the ends of rectangular tubes in frames, frameworks and support structures
- Finishing visible tube ends where a uniform white appearance is important
- Steel and aluminium tubes with wall thicknesses within the range stated in the specification
When selecting an insert, check the nominal tube size and wall thickness and compare them with the specification data. Plastic inserts are commonly used with steel and aluminium tubes, and polyethylene is lightweight and resistant to moisture.
The insert consists of a flat external flange and an internal section with ribs that fits inside the tube. This design provides a neat finish at the tube end and holds the insert securely in the opening.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
