Menu
- Photovoltaic Accessories
- Electrical Components
- Lightning Protection Systems
- Aluminium profiles
- Fastening Technology
- Balustrade Components
- Glass clamp holders
- Point glass holders - swivel fittings
- Floor-Mounted Glass Clamps - Spigot
- Full Glass Balustrades
- Side Post Fixings
- Rubber and Silicone Washers
- Infill Holders
- Handrail Brackets and Supports
- Balustrade Posts
- Rosettes - Cover Plates
- Fixings for Posts and Handrails
- End Caps
- Stainless Steel Tubes, Profiles and Rods
- Elbows, connectors
- Custom glass
- Mounting Accessories
- Cable system
- Glass Roofing Systems
- Fencing Systems
- Installation Technology
- Metalwork and Welding
- Bird and Rodent Deterrents
- New products
Glass holder 50x40x26 mm. pin, glass 6-10.76 mm, AISI 304, flat system, satin
Description
Glass Clamp 50x40 mm in AISI 304 Stainless Steel – Flat System, Satin Finish
AISI 304 stainless steel glass clamp designed for mounting glass panels with a thickness of 6 to 10.76 mm. The satin finish provides an elegant, professional appearance for balustrades and glass enclosures. Thanks to its screw-in design, the clamp is dedicated to fixing onto flat surfaces, enabling fast and repeatable installation in balustrade systems, glass screens, and both internal and external partitions.
The set includes a securing pin that prevents the glass from accidentally sliding out of the clamp — enhancing installation safety and eliminating the need to source additional components. The rubber insert inside the clamp protects the glass edge from damage and ensures a stable, play-free grip on the panel.
Technical Specification
- Material: AISI 304 stainless steel
- Finish: satin
- Length (L): 50 mm
- Height (H): 40 mm
- Width: 26 mm
- Glass thickness: 6–10.76 mm
- Mounting hole diameter: Ř8.5 mm
- Glass slot depth: 16 mm
- Base spacing: 38 mm
- Weight: 0.18 kg
- Volume: 52 cm3
- EAN: 5901289670494
- Mounting type: screw-in – flat system
- Included: securing pin
Applications
This clamp is suitable wherever a glass panel needs to be fixed to a flat steel or aluminium surface — including internal and external balustrades, office partitions, staircase screens, and terrace enclosures. Compatibility with glass thicknesses of 6–10.76 mm covers both monolithic toughened glass and laminated glass (e.g. 2×5 mm with 0.76 mm PVB interlayer), giving installers considerable flexibility when selecting the infill.
Additional Information
- The clamp requires rubber gaskets — select the appropriate gasket thickness to match the glass being installed
- Rubber gaskets are available as separate accessories
- Allen-head screws allow clamping pressure adjustment without removing the clamp
Technical data
| Material | AISI 304 |
| Finish | Satin |
| Mounting System | Flat |
| Glass Thickness [mm] | 6-10,76 |