Double-sided round door pull handle 45° AISI 304 satin 32×1400 mm
Leave feedback on the product
Double-sided round door pull handle made of AISI 304 stainless steel, satin finish. Tube diameter Ø 32 mm, length 1400 mm, hole spacing 1200 mm. Mounting angle 45°, through-fixing. Weight 3.32 kg. For glass, metal, timber, PVC and sliding doors.
Product code: 000-744
Product features
[PIM] pochwyty-antaby #151
- Material AISI 304
- Finish Satin
Description
Ø 32 mm handle with a length of 1400 mm on two supports, mounted at 45° – a pair of handles fitted on opposite sides of the door leaf
About the product
A back-to-back pull handle consists of a pair of handles fitted on opposite sides of the door leaf. The handles are connected by bolts passing through holes in the door leaf, making the door easy to open from either side.
The handle has a Ø 32 mm cross-section and a length L of 1400 mm. The supports are mounted to the door leaf at an angle of 45°.
The pull handle is made from AISI 304 stainless steel, finish: satin (satin-brushed finish).
Selection and installation
- ✓Mark out the mounting holes in the door leaf to match the centres of the pull handle supports.
- ✓Position the pull handles on opposite sides of the door leaf and connect them with through-bolts through the holes.
- ✓Tighten the fixings until the pull handle is secure with no play, and check that it is vertical.
Important
Holes in toughened glass must be made before toughening. Order the pull handle for a glass door together with the door leaf, or choose fixing centres that match the existing holes.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
