Categories
Aluminium Flat Bar EN AW-6060 T64 – 20×3 mm, Length 2000 mm
0
Description
Aluminium Flat Bar EN AW-6060 T64 – 20×3 mm, Length 2000 mm
Aluminium flat bar 20×3 mm is a versatile flat profile made from EN AW-6060 T64 alloy (AlMgSi0.5 / PA38). With a low weight of just 0.32 kg at a length of 2 metres and high corrosion resistance, it is a practical structural and finishing element that performs equally well in photovoltaic installations and general metalwork and assembly tasks.
The profile in its raw (non-anodised) state allows for any surface treatment — anodising, powder coating or painting — in accordance with the requirements of a specific project. Alloy 6060 in the T64 temper offers good machinability, ease of cutting and drilling, which translates into faster on-site assembly and less material waste.
Dimensions and Technical Specification
- Cross-section: flat bar (flat profile)
- Width (A): 20 mm
- Thickness (T): 3 mm
- Length: 2000 mm
- Material: aluminium EN AW-6060 T64 (AlMgSi0.5 / PA38)
- Surface: raw (non-anodised)
- Weight per piece (2 m): 0.32 kg (0.16 kg/m)
Applications
The aluminium flat bar 20×3 mm is widely used in installation and construction work. It is ideally suited as a reinforcing element for frames and supporting structures, a profile connector, spacer strip, mounting shim and finishing element in PV installations, ventilation systems and technical enclosures. The small thickness (3 mm) and low weight facilitate transport and on-site processing directly at the construction site.