Categories
Aluminium Flat Bar 20×5 mm EN AW-6060 – Flat Profile L=2000 mm
0
Description
Aluminium Flat Bar 20×5 mm EN AW-6060 – Flat Profile L=2000 mm
Aluminium flat bar 20×5 mm is a versatile flat profile made from EN AW-6060 T64 alloy (AlMgSi0.5 / PA38), supplied in lengths of 2000 mm. Thanks to the combination of low weight, good rigidity, and aluminium's natural corrosion resistance, this flat bar is suitable wherever a lightweight, durable and easy-to-machine structural element is required — from frame reinforcements and support structures to finishing trims and sheet metal work, through to repairs and prototype projects.
Benefits for the installer
- Low weight — only 0.54 kg per 2 m section (linear density 0.27 kg/m), making transport and installation at height straightforward
- Corrosion resistance — aluminium requires no additional corrosion protection in most outdoor applications
- Ease of machining — the 6060 alloy in T64 temper cuts, drills and bends excellently without risk of cracking
- Raw surface (non-anodised) — ready for further processing: anodising, powder coating, or leaving in its natural state
Technical specification
- Cross-section: flat bar (flat profile)
- Width (A): 20 mm
- Thickness (T): 5 mm
- Length: 2000 mm
- Material: aluminium EN AW-6060 T64 (AlMgSi0.5 / PA38)
- Surface: raw (non-anodised)
- Section weight (2 m): 0.54 kg
- Linear weight: 0.27 kg/m
Typical applications
The 20×5 mm aluminium flat bar is widely used in installation and construction work. It can serve as a reinforcing element for frames and frameworks, a mounting spacer, a finishing strip, as well as material for building lightweight support structures. It is also suitable for repair work — as a connector, spacer shim, or reinforcement for existing profiles.