Menu
- Photovoltaic Accessories
- Electrical Components
- Lightning Protection Systems
- Aluminium profiles
- Fastening Technology
- Balustrade Components
- Glass clamp holders
- Point glass holders - swivel fittings
- Floor-Mounted Glass Clamps - Spigot
- Full Glass Balustrades
- Side Post Fixings
- Rubber and Silicone Washers
- Infill Holders
- Handrail Brackets and Supports
- Balustrade Posts
- Rosettes - Cover Plates
- Fixings for Posts and Handrails
- End Caps
- Stainless Steel Tubes, Profiles and Rods
- Elbows, connectors
- Custom glass
- Mounting Accessories
- Cable system
- Glass Roofing Systems
- Fencing Systems
- Installation Technology
- Metalwork and Welding
- Bird and Rodent Deterrents
- New products
Postal Steel Group – activator for acrylic and anaerobic adhesives in aerosol 200 ml
Description
Postal Steel Group – activator for acrylic and anaerobic adhesives in aerosol 200 ml
Activator for acrylic and anaerobic adhesives by Postal Steel Group in convenient aerosol form 200 ml. Enables and significantly accelerates the bonding of methacrylate and anaerobic adhesives used for mounting stainless steel elements — particularly balustrades, handrails and structural joints. Thanks to its rapid action and simple application, it allows installation companies to shorten project completion times without compromising the quality of adhesive bonds.
Application method
The activator should be sprayed onto the bonding surfaces separately — not together with the adhesive. Adhesive is applied to the element with the smaller surface area, and the activator to the other bonded element of the joint. There is no need to wait for the activator to evaporate — bonding should be performed shortly after applying the adhesive. Bonding begins immediately after joining and pressing the elements together and proceeds very quickly.
Physicochemical properties
- Form: aerosol
- Capacity: 200 ml
- Chemical composition: organic chemical compounds in alcohol
- Viscosity: 1–3 mPa·s
- Density: 0.8 g/cm³
- Odour: characteristic
Operating and safety parameters
- Activity time in air: 24 h
- Recommended time for bonding after using activator: up to 1 h
- Flash point: +21 °C
- Auto-ignition temperature: +540 °C
Logistics data
- Weight: 0.23 kg
- Package volume: 362.7 cm³
- EAN: 5903313200899
Technical data
| Material | A2 - stainless steel |
| Thread type | M10 |