Categories
Dromet ring shank expansion anchor PSRe 10x70/5 electro-zinc plated
0
Description
Dromet ring shank expansion anchor PSRe 10x70/5 electro-zinc plated
The PSRe 10×70/5 ring anchor by Dromet is a proven mechanical fastener with a ring-shaped design, intended for the permanent fixing of profiles, metal structures, gratings, railings, machinery and other equipment components. Made from structural steel with an electro-zinc coating, it provides effective corrosion protection under standard operating conditions.
The anchor is supplied complete — with a nut and washer — eliminating the need to source additional components on site and speeding up installation.
Application and substrates
This fastener is designed to work in construction substrates made of:
- non-cracked concrete of at least B20 class
- natural stone with a dense structure
- solid brick
Typical applications include the fixing of mounting profiles, support structures for photovoltaic installations, walkway gratings, railings, balustrades, machinery and any elements requiring secure anchoring into a mineral substrate.
Certificates and approvals
The PSRe anchor has full documentation permitting its use in construction:
- European Technical Approval ETA 05/0242
- CE Certificate
- National Technical Approval AT-15-7574/2008
Holding valid approvals guarantees compliance with legal requirements and facilitates technical inspections on site.
Technical parameters
- Size: M10×70/5
- Total length: 70 mm
- Design: ring-shaped
- Material: structural steel
- Corrosion protection: electro-zinc plating
- Set includes: nut + washer
- Weight: 0.049 kg
- EAN: 5907518687677
- Sales unit: piece
- Manufacturer: Dromet
Installation recommendations
Correct installation of the PSRe ring anchor requires following several key rules:
- Drill the mounting hole perpendicular to the substrate surface
- After drilling, thoroughly clean the hole of dust and drilling debris
- Insert the fastener using light hammer taps
- Carry out installation using a torque wrench
- Once the fastener has expanded, the washer under the nut must be firmly pressed against the fixed element
- The parameters specified in Technical Approval AT-15-7574/2008 must not be exceeded
Detailed technical data — including permissible loads, minimum spacing and edge distances — are provided in Technical Approval AT-15-7574/2008. Before using the anchor in load-bearing structural connections, it is recommended to review the manufacturer's full documentation.