Categories
Dromet PSRe M6x70 mm galvanised expansion ring anchor for concrete
0
Description
Dromet PSRe M6x70 mm galvanised expansion ring anchor for concrete
The PSRe M6×70 ring anchor by Dromet is a reliable mechanical fastener with a ring design, intended for durable fixing in non-cracked concrete, natural stone with a compact structure, and solid brick. Thanks to its compact dimensions and weight of only 15 g, it is ideal for mounting light structural elements — profiles, brackets, holders and installation accessories.
The anchor holds a European Technical Approval ETA 05/0242, CE certificate and national approval AT-15-7574/2008, guaranteeing compliance with European standards and confirming its approval for use in construction works.
Application
The PSRe anchor is designed for mounting metal profiles and structures, walkway gratings, railings, machinery and other structural and equipment components. The base material must be non-cracked concrete of at least class B20 (C16/20), natural stone with a compact structure, or solid brick.
Technical parameters
- Manufacturer: Dromet
- Type: ring (PSRe)
- Thread: M6
- Total length (L): 70 mm
- Drilling diameter (fi): 6 mm
- Anchoring depth (F): 55 mm
- Thickness of fixed element (E): 12 mm
- Minimum hole depth (D): 100 mm
- Weight: 0.015 kg
- Material: structural steel
- Corrosion protection: electrolytic galvanising
- EAN: 5907518660977
- Sales unit: piece
Installation diagram and dimensional markings
The cross-section diagram shows the correct installation of the anchor in a concrete base, with markings of the key parameters:
- M — thread diameter
- L — total anchor length
- D — minimum depth of the mounting hole
- F — anchoring depth in the base material
- E — thickness of the fixed element (protruding section)
- H — hole diameter in concrete
Installation recommendations
- The mounting hole should be drilled perpendicular to the surface of the base material and thoroughly cleaned
- The anchor should be able to be inserted into the hole with light hammer taps
- Tighten the nut only using a torque wrench
- After the anchor has expanded, the washer under the nut must be firmly pressed against the fixed element
- The parameters specified in the technical approval AT-15-7574/2008 must not be exceeded
Certificates and approvals
- European Technical Approval: ETA 05/0242
- Certificate: CE
- National technical approval: AT-15-7574/2008