Categories
Dromet PSRe M12x180/88 expansion ring anchor, galvanised steel
0
Description
Dromet PSRe M12x180/88 expansion ring anchor, galvanised steel
The PSRe M12x180/88 ring anchor by Dromet is a proven mechanical fastener with a ring design, intended for permanent anchoring in substrates made of non-cracked concrete min. class B20, natural stone with a dense structure, and solid brick. Thanks to its European Technical Approval ETA 05/0242, CE certificate and national approval AT-15-7574/2008, it is a suitable choice for applications requiring documented load capacity and compliance with standards.
The anchor works perfectly for fastening metal profiles and structures, mesh flooring, handrails, machinery and other structural and equipment elements. Supplied complete with nut and washer, it allows installation to begin immediately without the need to source additional components.
Technical specification
- Type: ring anchor (ring design)
- Thread: M12
- Total length: 180 mm
- Drilling diameter: Ø 12 mm
- Anchoring depth (F): 85 mm
- Working length (E): 88 mm
- Threaded stud length (D): 130 mm
- Material: structural steel
- Corrosion protection: electrolytic zinc plating
- Weight: 0.153 kg
- Set includes: nut and washer
- EAN: 5907518643567
Certificates and approvals
- European Technical Approval ETA 05/0242
- CE certificate
- National Technical Approval AT-15-7574/2008
Installation recommendations
The mounting hole should be drilled perpendicular to the substrate surface and thoroughly cleaned of drilling dust. The anchor is inserted into the hole using light hammer blows. Tighten the nut only with a torque wrench – this ensures correct expansion of the sleeve and full load capacity of the fastener. After expansion, the washer under the nut should be firmly pressed against the mounted element. Detailed parameters for loads, spacing and edge distances can be found in Technical Approval AT-15-7574/2008 – the limit values specified therein must not be exceeded.