Categories
Dromet PSRe 14x220/112 galvanised expansion ring anchor
0
Description
Dromet PSRe 14x220/112 galvanised expansion ring anchor
The PSRe 14x220/112 ring anchor by Dromet is a reliable expansion fastener designed for the permanent fixing of profiles, metal structures, grilles, railings, machinery and other equipment components. Thanks to its ring design with nut and washer, it ensures secure and repeatable fixing in concrete, stone and masonry substrates.
The anchor holds European Technical Approval ETA 05/0242 and CE certification, and is also covered by national approval AT-15-7574/2008 — confirming its compliance with safety requirements and its suitability for use in critical structural fixing points.
Application
The anchor is designed for use in building substrates made of:
- Non-cracked concrete, minimum class B20
- Natural stone with a dense structure
- Solid brick
It is ideal for installing photovoltaic structures, balustrades, industrial installations and any elements requiring permanent anchoring in mineral substrates.
Technical parameters
- Size: 14x220/112
- Overall length: 220 mm
- Anchoring depth: 112 mm
- Weight: 0.25 kg
- Design: ring type with nut and washer
- Material: structural steel
- Corrosion protection: electrolytic zinc plating
- Sales unit: piece
- EAN: 5907518686168
Certificates and approvals
- European Technical Approval ETA 05/0242
- CE certificate
- National approval AT-15-7574/2008
Installation recommendations
The mounting hole should be drilled perpendicular to the substrate surface and thoroughly cleaned of drilling dust. The fastener should be able to be inserted using light hammer taps. Installation should be carried out using a torque wrench — after the fastener expands, the washer under the nut should be firmly pressed against the fixed component. All permissible loads and installation distances are specified in Technical Approval AT-15-7574/2008 — the parameters contained therein must not be exceeded.