Categories
Dromet PSRe 14×250/142 galvanised ring expansion anchor
0
Description
Dromet PSRe 14×250/142 galvanised ring expansion anchor
The PSRe 14×250/142 ring anchor by Dromet is a durable expansion fastener designed for the permanent fixing of profiles, metal structures, grilles, railings, machinery and other building equipment components. Thanks to its ring design with nut and washer, it ensures reliable and repeatable fixing in non-cracked concrete min. B20, dense-structure natural stone and solid brick substrates.
The anchor holds a European Technical Approval ETA 05/0242, a CE certificate and a national approval AT-15-7574/2008, confirming compliance with strict safety standards and approval for use in structurally responsible connections. For installation companies, this means full technical documentation required for acceptance procedures and inspections.
Technical specification
- Thread diameter: M14
- Overall length: 250 mm
- Anchoring depth: 142 mm
- Design: ring type with nut and washer
- Material: structural steel
- Corrosion protection: electrolytic zinc plating
- Weight: 0.282 kg
- Sales unit: piece
- EAN: 5907518676930
Approved installation substrates
- Non-cracked concrete min. B20
- Natural stone with a dense structure
- Solid brick
Certificates and approvals
- European Technical Approval ETA 05/0242
- CE certificate
- National technical approval AT-15-7574/2008
Installation recommendations
The mounting hole should be drilled perpendicular to the substrate surface and then thoroughly cleaned. The fastener should be able to be inserted with light hammer taps. Installation should be carried out using a torque wrench — after expansion of the fastener, the washer under the nut should be firmly pressed against the fixed element. All load and spacing parameters are specified in the Technical Approval AT-15-7574/2008 — these must not be exceeded.