Categories
Dromet PSRe 10x230/150 galvanised ring anchor bolt
0
Description
Dromet PSRe 10x230/150 galvanised ring anchor bolt
The PSRe 10x230/150 ring anchor bolt by Dromet is a proven mechanical fastener with a ring construction, designed for permanent fixing in non-cracked concrete of min. class B20. Thanks to ETA 05/0242 certification, CE marking and the national technical approval AT-15-7574/2008, it meets the highest standard requirements — it can be used in critical structural connections without risk of the design being questioned by a supervising inspector.
The anchor is supplied complete — with a nut and washer — eliminating the need to source additional components on site and speeding up installation.
Application
The PSRe anchor bolt is designed for fixing metal profiles and structures, grating platforms, handrails, balustrades, machinery and other structural elements and facility equipment. Approved base materials include:
- Non-cracked concrete min. class B20
- Natural stone with a dense structure
- Solid brick
Technical parameters
- Thread size: M10
- Overall length: 230 mm
- Anchoring depth: 150 mm
- Construction: ring type
- Material: structural steel
- Corrosion protection: electrolytic zinc plating
- Weight: 0.128 kg
- EAN: 5907518679238
Certificates and approvals
- European Technical Approval: ETA 05/0242
- Certificate: CE
- National technical approval: AT-15-7574/2008
Installation recommendations
The mounting hole should be drilled perpendicular to the base surface, then thoroughly cleaned of dust and debris. The fastener should be able to be inserted into the hole with light hammer taps. The nut should be tightened using a torque wrench — once the anchor has expanded, the washer under the nut must be firmly pressed against the fixed element. Installation parameters (tightening torque, spacing, edge distances) are specified in the AT-15-7574/2008 technical approval — the values stated therein must not be exceeded.